Wencon Cleaner
The degreasing agent Wencon Cleaner guarantees you the best possible adhesion to surface and the Wencon epoxy based products such as the Cream and Coating. The Wencon Cleaner evaporates completely and doesn’t leave any residu to the surface which is very important for a good adhesion of all types of Epoxy Repair Products. Never use products such as Thinner, White Spirit etc. because the leave an invisible film of residu to the surface which is responsible for a poor adhesion of epoxy based products.
Wencon Bio Cleaner
Wencon Bio Cleaner is a water based alkaline degreaser, which is used for cleaning purposes prior to application of Wencon products. Wencon Bio Cleaner is an environmentally friendly product and is classified as Non Dangerous Goods. This means, that we are now able to offer you shipment where WENCON Bio Cleaner can be included with other WENCON products without any documentation, with flexible delivery and reduced freight costs.
Wencon Bio Cleaner can be applied on wet or dry surfaces, and is supplied in 750ml units.
We recommend the new WENCON Bio Cleaner, with laboratory tests showing significantly stronger adhesion.
Information on instruction for use
Wencon Bio Cleaner is delivered with a separate spray, which is set for foam spray when delivered. We recommend using foam spray, due to the efficiency.
Wet surface: Apply Wencon Bio Cleaner and let it work for 5-10 min. If necessary use brush. Rinse off with water or wipe with a wrung cloth. Then apply Wencon UW Coating as a primer and hereafter any Wencon products can be applied.
Dry surface: Apply Wencon Bio Cleaner and let it work for 5-10 min. If necessary use brush. Rinse off with water or wipe with a wrung cloth and hereafter dry out for a completely dry surface. Then any Wencon products can be applied.
Wencon Cleaner 1100 IMPA 812349 ISSA 75.553.01
Wencon Bio Cleaner 1104 IMPA Follow a.s.a.p.
